ORBCOMM Satellite IoT

ORBCOMM Satellite IoT and Asset Tracking Solutions

Pipelines, pumps, generators, vessels and vehicles often sit far beyond cellular coverage, yet operators still need to know where they are and whether they are working. ORBCOMM's satellite IoT services, now offered under its SKYWAVE brand, send small, regular messages from remote assets over satellite or hybrid satellite-cellular links. GCCSAT supplies, integrates and supports ORBCOMM devices, connecting them to sensors and controllers and delivering the data into the platforms your teams already use.

This page explains the satellite networks behind ORBCOMM, the main device families, typical applications in energy, utilities, mining and maritime, and how we take a project from pilot to fleet-wide rollout. If you need broadband for people rather than telemetry from machines, our VSAT, OneWeb and Starlink pages are the better starting point.

At a glance

Built for small data

Satellite IoT is designed for location reports, alarms and sensor readings rather than video or browsing, so terminals are compact, power-efficient and practical to deploy in large numbers.

Hybrid satellite and cellular

Devices such as the ST 9100 use cellular where it is available and fall back to satellite automatically, so assets stay connected as they move in and out of coverage.

Solar-powered asset tracking

The SC 1000 tracker runs on solar power with a backup battery and reports more often once it detects movement, suiting trailers, generators and equipment without a power feed.

Programmable at the edge

Programmable terminals process sensor data locally and send only what matters, reducing airtime use and raising alarms the moment a threshold is crossed.

The Satellite Networks Behind ORBCOMM IoT

ORBCOMM's satellite IoT services include OGx, IsatData Pro and OG2. OGx is the newest, running over Viasat's geostationary L-band network with larger message sizes, faster delivery and lower device power use than earlier services, which opens the door to imaging, over-the-air updates and larger data logs. IsatData Pro has supported satellite IoT deployments for more than a decade, while OG2 is ORBCOMM's low Earth orbit constellation built specifically for IoT. We select the service by message volume, reporting frequency, latency tolerance and where the assets operate.

ORBCOMM Devices for Tracking and Remote Monitoring

The SKYWAVE device range covers most telemetry needs. The ST 9100 is a programmable hybrid terminal with serial, CAN bus and Bluetooth interfaces for connecting engines, controllers and sensors. The ST 6100 is a programmable satellite terminal with essential interfaces, the ST 2100 is a rugged satellite modem that adds a satellite path to an existing cellular IoT design, and the SC 1000 is a self-contained solar tracker. For manufacturers building their own products, embeddable modules such as the ST 4000 and ST 6000 are also available.

  • ST 9100: hybrid cellular-satellite, rich interfaces
  • ST 6100: programmable satellite-only terminal
  • ST 2100: satellite modem for existing systems
  • SC 1000: solar-powered asset tracker

Satellite IoT Applications in Energy, Utilities, Mining and Maritime

In oil and gas, ORBCOMM terminals report from pipelines, flow meters, tank levels, wellhead compressors and cathodic protection points, reducing routine site visits. Utilities use them to extend SCADA monitoring to remote substations, valves and pumps. Mining operators track water pumps and equipment across large concessions, and maritime users monitor vessel position and onboard systems, including for fisheries monitoring. Agriculture and transportation users apply the same approach to irrigation, livestock water and vehicle location. Wherever assets are dispersed and power is scarce, low-data satellite links offer a practical way to see what is happening.

From Pilot to Fleet Rollout: Our ORBCOMM Integration Process

We begin by defining what each asset must report, how often and to whom, then choose the device, satellite service and power source. A pilot on a handful of assets proves the sensor wiring, message formats and alert thresholds before wider rollout. Our engineers install terminals with clear sky visibility, connect sensors through the device interfaces, and configure reporting and edge logic. Data is delivered to your SCADA, fleet or analytics platform, and our support team monitors device health, airtime and alarms so failed units are identified and replaced quickly.

Frequently Asked Questions

What is ORBCOMM used for?

ORBCOMM provides industrial IoT connectivity and devices for tracking and monitoring remote assets. Its satellite and hybrid terminals report location, status and sensor data from equipment such as pipelines, pumps, generators, vessels and vehicles, especially where cellular networks do not reach or cannot be relied on.

What is the difference between OGx and IsatData Pro?

Both are ORBCOMM satellite IoT services over geostationary L-band satellites. OGx is the newer service, offering larger messages, faster delivery and lower device power consumption, while IsatData Pro is the established service that has supported deployments for more than a decade. Some terminals, such as the ST 6100 and ST 9100, support both.

Can satellite IoT track assets in real time?

Satellite IoT reports at configured intervals rather than streaming continuously. A tracker might report every few hours when parked and much more often once it moves, as the SC 1000 does, and alarms can be sent as soon as an event occurs. We tune reporting schedules to balance visibility, battery life and airtime.

Do ORBCOMM devices work without mains power?

Yes. Many deployments run from batteries, solar panels or the asset's own power supply. The SC 1000 is solar powered with a backup battery, and reporting schedules on programmable terminals can be set to conserve energy, extending operation at sites where maintenance visits are rare.

Does GCCSAT integrate ORBCOMM data with our existing systems?

Yes. GCCSAT supplies, integrates and supports ORBCOMM devices end to end. We configure message formats and device logic, deliver data to your SCADA, fleet management or analytics platform, and help your team set alerts and dashboards, so satellite telemetry becomes part of normal operations rather than a separate system.

Talk to a GCCSAT engineer

Tell us where you operate and what you need to connect. We reply within 24 hours with a recommended design.

WhatsAppHow can I help you?